|
|
|
 |
Download
|
 |
| Yueming Laser Engraving Software is a series of supporting software developed specially for series of engravers produced by Yueming. The principles to develop this software are convenient, quick and easy use. It’s a kind of very practical software with the obvious advantages of simple operating interface, quick response and learning and use easiness as well as supporting of various formats as far such as BMP, BLT, JPG, JPEG, and GIF. PLT format is vector graph and it’s of advantages of high precision, small size, and quick computation. BMP’s advantages are direct output from scanning (on the basis of high quality graph) to save graph making time and it’s better than PLT format for screen dot running. Use of these two formats can satisfy the engraving needs of various customers and resolve the issue of parameter setup. It realizes the aim of one-time output and increases the efficiency. It’s an ideal engraving software for most customers at present. |
|
|
|
| Certificate of Computer Software Copyright Registration
|
Certificate of Computer Software Copyright Registration
| |
| Name: |
USBDriver USB |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| size: |
319KB |
| Instruction: |
Installation driver suitable for all machine models |
| Name: |
LaserHostⅡ3.0.13 |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
917KB |
| instructions: |
LaserHostⅡ3.0.13 is the direct outputing software in both English and Chinese languages, which installed in the machines equipped with no. 2 motherboard. It support the direct outputing from CorelDraw (12.0 or 13 version) and AutoCAD (2004, 2005 or 2006 version). |
| Name: |
the program for upgrading No.2 motherboard |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
568KB |
| instructions: |
This program is used for the upgrading of No.2 motherboard. It can be run directly by operating on the control panel of the machine. It's no need to connect with computer.
Detailed upgrading steps please refer to the file in the software package. |
| Name: |
USBDriver |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
319KB |
| instructions: |
It's applicable for all machines to install the driver program. |
| Name: |
SmartCarver 3.014Yueming Output software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
1.89MB |
| instructions: |
SmartCarver Setup3.014 is a Yueming output software for CM, PN, TM and AM machines. It’s a software need installation and there are four kind of languages for choice after installation: Simplified Chinese, traditional Chinese, English and Japanese. The formats it supports include PLT, BMP, DXF, DST, etc.. The main improvements of this version are:
Almost resolved the problem of messy code in Traditional Chinese software;
Decreasing line sipping in BMP cleaning and almost eliminated all such phenomena. |
| Name: |
SmartCarver 3.016 Yueming Output software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
1.89MB |
| instructions: |
Compared with SmartCarver Setup3.014, the main improvements of SmartCarver Setup3.016 is the addition of the function of track output, i.e., choice at your discretion of the start line can be made when outputting engrave. |
| Name: |
For CAD 3.013 Yueming CAD Direct Output Software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
2.73MB |
| instructions: |
CAD Setup3.013 is direct CAD output software for CM, PN, TM, and AM machines. It’s a software need installation and there are four kind of languages for choice after installation: Simplified Chinese, traditional Chinese, English and Japanese. It’s the latest software fo the company and its main improvements of this version are:
Mlmost resolved the problem of messy code in Traditional Chinese software;
Corrected a small bug in the software. |
| Name: |
SmartCarver 2.0.04 Yueming Output Software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
299KB |
| instructions: |
SmartCarver 2.0.04 is an old version of Yueming Output software for CM, PN, TM, and AM machines. There are English and Chinese software in the zip file and they can be start without installation after unzip. |
| Name: |
Parameter Setup Software (CN&EN) |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
48KB |
| instructions: |
Parameter Setup Software is used for setup and modification of CM, PN, TM, and AM machines. There are English and Chinese software in the zip file and they can be start without installation after unzip. |
| Name: |
File Download Software (CN&EN) |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
22KB |
| instructions: |
File Download Software is used for CM, PN,, TM, and AM machines to download the .out format files of Yueming for engraving output. Thus, the off-line operation can be realized. There are English and Chinese software in the zip file and they can be start without installation after unzip |
| Name: |
LaserCarver CN Yueming Output Software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
284KB |
| instructions: |
LaserCarver CN is Chinese output software for YM and GM machines, which can be used without installation after unzip. |
| Name: |
LaserCarver EN Yueming Output Software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
291KB |
| instructions: |
LaserCarver EN is English output software for YM and GM machines, which can be used without installation after unzip. |
| Name: |
For AutoCAD1.01 Yueming CAD Direct Output Software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
743KB |
| instructions: |
For AutoCAD1.01 is direct CAD output software need installation with Chinese and English version for YM and GM machines. |
| Name: |
For-Coreldraw11 Yueming Coreldraw11 Direct Output Software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
743KB |
| instructions: |
For-Coreldraw11 is direct Coreldraw11 output software need installation with Chinese and English version for YM and GM machines. |
| Name: |
BrandCut Setup2.007 Yueming Brand Cutting Software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
1.43MB |
| instructions: |
BrandCut Setup2.005 is software for brand cutting machine. It can be used after installation and language choice. |
| Name: |
Yueming Virtual Printing Software |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
4.43MB |
| instructions: |
Virtual printing software is for CM, PN, TM, and CM main board with the function of printer. Simplified Chinese, Traditional Chinese, English or Japanese can be chosen when installation. After making the graph, it is as simple as print it with printer to choose the Topwisdom virtual printer to output it to engraver for engraving. |
| Name: |
YmMarker2.0.12 is the marking software and driver program |
| OS: |
WINDOWS 98/Me/2000/XP/2003 ( suggest WIN2000 or above) |
download |
| CPU: |
Pentium III or above that is compatible CPU |
| Memory: |
128MB(suggest 256MB or above) |
| Size: |
4.43MB |
| instructions: |
YmMarker2.0.12 is the marking software and driver program, that is applicable for all CO2, YAG and Semiconductor laser marking machine . It has both English and Chinese language versions. | |
|
|
